Stage, tester and heat treatment (aging)
After extruding, the aluminum profile is placed on strip tables so that after cooling, the stretch is worked or (stretched) to take the final shape, then it is cut to the dimensions desired by the customer and placed inside the aging furnace for heat treatment on it. Then it should be delivered to the customer's order prepared as (raw, electrostatic paint (powder), anodizing and decorative or wood design).
Heat treatment or in other words, aging of aluminum profiles is done to increase the strength and durability of surfaces and creates uniform hardness in them. Such heat treatments should be performed for different types of alloys to achieve the desired hardness and strength.
How to perform heat treatment in the aging furnace
In fact, this stage of work is in such a way that after cutting the profiles and making them in the desired size and size, the profiles are transferred into the furnaces to increase their hardness and strength to the desired level.
Decreased temperature on the surface:
In these furnaces, the temperature is raised to the desired level to achieve the desired result. The high temperature created by the inside of the furnace must be reduced over a period of time, in other words, the cross-section must be well cooled.
Measurement of surface hardness with the help of special devices:
After finishing the work and lowering the temperature of the surfaces, they should measure the hardness created by using special devices to do this, and after the inspections, they should be approved by the quality control unit to be ready to provide Become a customer.
