Advantage of aluminum double glazed doors and windows against all types of UPVC
The galvanized form is provided, which is sometimes used for UPVC waste profiles due to concealment in the final product. The strength of aluminum profiles is many times that of a UPVC profile. Aluminum metal has aesthetic properties, high durability, paintability and many other properties. In the past few years, unfortunately, regardless of the specific climatic conditions of the country, compared to European countries, PVC doors and windows profiles have been imported or produced in the country, due to the lack of technical and scientific knowledge and advertising. False and, of course, widespread fever among some consumers and took part in the consumer market in the construction industry and the supply of doors, windows and glass facades. But it will not be long before the level of consumer awareness and science and experiences of using this type of doors, windows and facade coverings and the occurrence of problems due to the passage of time created in the PVC consumer market can be touched and observed quickly and in a very noticeable way. .
Despite the known problems and the consequences of using PVC in the construction of doors and windows and its application in the appearance of buildings, another discussion was opened among some manufacturers of this product in order to maintain the PvC consumer market and that is to replace doors and windows with materials. And UPVC was a substitute for PVC, while 90% of what is on the market is not essentially UPVC because the price of UPVC is at least twice the price of PVC, which is not affordable for most consumers and is not economical.
Much has been written and discussed about the differences between UPVC and aluminum doors and windows.
But if we want to summarize the contents in this field and make it concise and useful, we can mention the following:
Despite the very similarity in the fittings of both systems and the variety of different brands, in this regard, hinges, handles and other fittings in UPVC windows are mounted directly on profiles of the same material, which due to high weight and repeated use over time as profile elements at the joint. The screw is weaker and so-called open, which as a result of this action we see a lot of sash and other deformations in the UPVC window, which happens much less in aluminum because the fittings are attached directly to the aluminum metal.
It also loses its quality over a period of natural temperatures. That is, at the above-normal temperature mentioned above, and also in the natural cold, it deforms, or it hardens and cracks and becomes brittle. UPVC also changes color and yellowing in the sun, even if the UV coatings, the quality of which can not be tested for the consumer and have become more beautiful and advertising sentences, even if used properly, ensure reliable performance and durability. Has not shown experience. This is in the context that the resistance of aluminum to the above climatic conditions is obvious and does not need to be explained.
10- Energy loss:
The most obvious advantage of UPVC over aluminum, which often causes pride and erosion, is its low heat transfer coefficient, which, of course, is lost despite the thermal break product of aluminum. However, it is good to measure the difference between the energy dissipation of a UPVC product and a non-thermal product of aluminum breaker and in fact ordinary.
The greatest energy loss in doors and windows is due to their lack of ventilation and the air blinds they create. The above two products, if properly manufactured, are both airtight. Secondly, 90% of the surface of the door and window is made of glass, which in both cases is the same double-glazed glass and there is no difference between them. Therefore, the difference between two similar products is only where about 5% of the surface can be. That is, if we assume the maximum heat transfer coefficient of aluminum and the heat transfer coefficient of UPVC, for example, zero (which of course is not the case), the loss of a normal and non-thermal aluminum window breaker can be up to 5% less than UPVC. This amount is correct, and it is a number that is almost negligible in terms of proportion.
"The correctness of fulfilling the obligations and observing the professional principles of customer orientation are among the most important principles for us."